XiaoFlasher m365(Pro/1S/Pro2)

The Wall You Didn't Know You Hit

You're cruising on your Xiaomi or Segway Ninebot electric scooter, feeling the wind, and then—at about 15 mph (24 km/h)—the motor just cuts out. The power vanishes. You're left coasting, relying on your own momentum. That's not a glitch; that's a factory-imposed software limit. Manufacturers lock down your scooter's true potential to meet regional regulations and protect their warranty claims. But what if you could take control of what you already own? That's exactly what XiaoFlasher m365 (Pro/1S/Pro2) offers: a direct, no-nonsense tool to rewrite the stock firmware and unlock the performance that's been deliberately hidden from you.

This app is an independent flashing utility designed specifically for Xiaomi Mi Scooters (M365, Pro, 1S, Pro 2) and select Segway Ninebot models. It is not affiliated with either company. What it does is simple: it gives you the ability to modify the software that controls your scooter's behavior. When you use XiaoFlasher, you are lifting restrictions that the default firmware enforces. This includes removing the speed cap, adjusting power delivery, and tuning acceleration curves. Be aware that modifying the firmware voids any remaining manufacturer warranty. The developers strongly recommend that you only proceed if you fully understand the specific changes you are making, as improper settings can lead to hardware damage or unsafe riding conditions.

Unlock the Speed Governor

The most immediate benefit you will feel is the removal of the 15 mph (24 km/h) speed limiter. In many regions, scooters are software-capped at this speed to comply with local e-bike or e-scooter laws. The stock firmware cuts motor assistance at that exact threshold. With XiaoFlasher, you can disable that governor. This means the electric motor will continue to provide power even as you exceed 15 mph, allowing you to reach the scooter's true mechanical top speed (typically around 18-20 mph or 30-32 km/h depending on your model and battery voltage). You will experience a continuous, smooth power band instead of hitting an invisible wall.

Enhanced Acceleration and Torque

Beyond just top speed, you can fine-tune how your scooter responds. Manufacturers often deliberately soften acceleration and peak power output to extend component lifespan and prevent overheating. With XiaoFlasher, you can increase the motor's current limits and adjust the throttle response curve. The result is noticeably sharper acceleration from a standstill, quicker roll-on power when you're already moving, and significantly easier climbing on steep hills. However, this is the more aggressive tuning path. Pushing the motor harder generates more heat and stresses the battery, controller, and wiring. You must monitor the scooter's temperature (the app provides real-time data) and avoid sustained maximum loads. Over-tuning can cause permanent damage—you are trading some durability for raw performance.

Zero Ads, Full Control

Unlike many free utility apps, XiaoFlasher contains no advertisements. You will not be interrupted by pop-ups or banners while you are configuring your scooter. The interface is focused entirely on the flashing process and parameter adjustments. This also means the app is leaner and less data-hungry on your device.

What You Can Adjust

• Speed Limit Removal: Disable the 15 mph (24 km/h) software cap.
• Motor Current (Power): Increase or decrease the maximum current drawn by the motor. Higher current = more torque and acceleration.
• Battery Current (Regen): Adjust the strength of regenerative braking and the current flow back to the battery.
• Throttle Start Speed: Set the minimum speed at which the motor engages when you push off.
• Cruise Control: Enable or disable the built-in cruise control feature.
• Firmware Flashing: Write custom firmware versions (including modified .bin files) to the scooter's main controller (DRV) and battery management system (BMS).
• Live Diagnostics: View real-time data such as battery voltage, motor temperature, controller temperature, current draw, and speed.

Important Considerations Before You Flash

• Warranty Void: Any modification using this app will void your manufacturer's warranty.
• Legal Compliance: Removing speed limits may be illegal on public roads in your country or state. You are responsible for knowing and following local laws.
• Safety Risk: Increased speed and power reduce your stopping distance and increase the severity of a crash. Always wear a helmet and protective gear.
• Hardware Stress: Higher power settings generate more heat. Sustained high loads can damage the motor, controller, or battery. Monitor temperatures during your first few rides.
• Data Usage: The app requires an internet connection to download firmware files and communicate with the scooter via Bluetooth. Standard data charges from your carrier apply.
• Age Restriction: You must be at least 18 years old to use this software and operate the modified scooter.

Download XiaoFlasher m365 (Pro/1S/Pro2) Now

Exclusive access for first users: unlock the full performance profile of your scooter today. This is a limited opportunity to take complete control of your ride without waiting for manufacturer updates. Download the APK file directly and start flashing your custom firmware within minutes. Don't ride with artificial limits any longer—grab the power that's already in your hands.